Page 83/84
December 2019W11/W12/W13 | Operation manual
13. FINAL MOTHBALLING OF THE WHEEL LOADER/DECOM-
MISSIONING
ENVIRONMENTAL INFORMATION
Do not harm the environment! Do not allow oils or oily wastes to enter the ground or water bodies! Dispose of the
different materials, and operating and ancillary materials, separately and in an environmentally compatible
manner!
If the wheel loader is no longer going to be used for its intended use, ensure that it is mothballed or decommissioned
and disposed of in accordance with the applicable regulations!
Before disposal
• Comply with all applicable safety regulations relevant to wheel loader decommissioning!
• Make sure that the wheel loader cannot be operated between decommissioning and further disposal!
• Ensure that no environmentally hazardous operating and ancillary materials escape and that the machine
presents no further hazards at the parking location!
• Secure the wheel loader against unauthorized use! Close and lock all openings (doors, windows, hood) and
secure the wheel loader as described in section 13. "FINAL MOTHBALLING OF THE WHEEL LOADER/
DECOMMISSIONING"!
• Attach all safety guards!
• Repair leaks in engine, tanks and hydraulic system!
• Remove the battery!
• Store the wheel loader at a location secured against access by unauthorized persons!
Disposal
• Downstream recycling of the wheel loader must comply with current best practice in force at the time of
recycling and comply with accident prevention regulations!
• All parts must be disposed of in the designated locations, depending on the material!
• Pay attention to material separation during recycling!
• Pay attention to environmentally compatible disposal of operating and ancillary materials!
To Next Page
Loading...
