Page 73/84
December 2019W11/W12/W13 | Operation manual
8. Fit the new wheel and the wheel nuts.
9. Tighten the wheel nuts.
10. Lower the jack again.
11. Alternately tighten the opposite wheel bolts to the specified torque.
10.7.10 Servicing the electrical system
Do not clean sensitive electrical components (instrument box, generator, compact plugs, multi-function lever, etc.)
with a high pressure washer.
Do not touch light bulbs and headlamp reflectors with your fingers!
Always disconnect the battery before working on the electrical system if tools, spare parts, etc., may come into
contact with electrical components or contacts.
Have faults in the electrical system repaired by trained specialist personnel!
Fuse allocations
The electrical circuits are protected by a variety of different fuses The fuses are located in the fuse box beneath the
driver's seat
ENVIRONMENTAL INFORMATION
Do not harm the environment! Collect old transmission oil and dispose of it in an environmentally friendly manner.
Check the fuses in case of electrical failures!
If a fuse blows, identify and rectify the cause before replacing the fuse. Only replace defective fuses with fuses of
the same capacity!
To Next Page
Loading...
