Page 39/84
December 2019W11/W12/W13 | Operation manual
Loading the wheel loader on a transport vehicle
Accident hazard due to incorrect loading!
Clean the wheel loader of coarse soiling before loading and transporting. Use transportation equipment of
appropriate load bearing capacity.
(Observe the wheel loader's service weight!)
Accident hazard due to falling or slipping when loading the wheel loader. Caution when loading and transporting in
snow and ice.
Independently driving onto transportation equipment
Accident hazard due to incorrect loading!
Use only sufficiently dimensioned and undamaged loading ramps (observe the wheel loader's service weight!).
Keep the transport surface and the loading ramps free of any oil or grease.
Secure the wheel loader after driving onto the transportation equipment as described in section 7. "SECURING THE
WHEEL LOADER". Block the articulated joint with the jackknife guard.
Lashing the wheel loader
Accident hazard due to incorrect loading!
Always block the articulated joint before the wheel loader is lashed to transportation equipment! Use chocks to
prevent the wheel loader from slipping or rolling away. Lash the wheel loader only at the attachment points
provided for this purpose. Use only lashing equipment with sufficient load bearing capacity.
Use the towing points and the attachment points at the top of the front end and all other marked lashing points as
attachment points for lashing the wheel loader. Additional lashing points on the undercarriage can be used.
To Next Page
Loading...
