48
49
3
7
8
9
10
11
Confirm with .
Confirm with
.
The vial must always be held
upright when attaching the pump.
Do not touch the interior of the ad‑
apter when attaching the pump.
Risk of injury on spike and risk of
loss of sterility.
Insert vial
Place the vial in the space
provided for this purpose in the docking
station. The seal of the vial is
sterilised.
If contamination is suspected, you
should disinfect the cap with an
alcohol swab.
Remove protective cap
Take a new drug vial and remove the
orange cap from the vial.
Attaching the pump with reservoir
and adapter to the vial
Attach the pump (with reservoir and
tightened adapter) to the vial vertically
from above as depicted.
The adapter will snap into place on the
vial with an audible click.
To Next Page
Loading...