2
TABLE OF CONTENTS
SPECIAL NOTICE AND CALIFORNIA PROPOSITION 65 WARNING 3
CUSTOMER GREETING AND EXPLANATION OF PROCEDURES 4
WARRANTY AND CONTACT INFORMATION 5
SAFETY DISCLAIMER AND HF WARNING 6
SAFETY WARNINGS, DANGERS, CAUTIONS AND INSTRUCTIONS 7
GENERATOR OPERATION, OPERATING VOLTAGE AND OTHER GENERAL INFORMATION 10
DUTY CYCLE EXPLANATION STATEMENT 11
SPECIFICATIONS: DUTY CYCLE, PERFORMANCE SPECIFICATIONS AND INPUT AMPERAGE INFORMATION 12
SETUP GUIDE: GETTING STARTED, UNPACKING YOUR UNIT, ASSEMBLY AND INSPECTION 13
SETUP GUIDE: CONNECTING YOUR UNIT TO THE POWER SOURCE AND WIRING INFORMATION 15
SETUP GUIDE: SHIELDING GAS INFORMATION AND CONNECTION OF REGULATOR 16
SETUP GUIDE: TUNGSTEN SELECTION AND GRINDING 17
SETUP GUIDE: GETTING STARTED WITH TIG AND STICK BASIC STARTING POINT GENERAL INFORMATION 20
SETUP GUIDE: CONNECTING YOUR UNIT AND READYING TO WELD (POLARITY AND PANEL CONNECTIONS) 21
FRONT PANEL VIEW AND COMPONENT ID 23
REAR PANEL VIEW AND COMPONENT ID 24
CONTROL PANEL LAYOUT 25
STARTING UP THE WELDER 26
CONTROL PANEL OPERATION AND NAVIGATION 27
WELD CYCLE AND GRAPH LINE DETAILS 37
AC TIG SCREEN SETUP, FUNCTIONS AND PARAMETERS 40
DC TIG SCREEN SETUP, FUNCTIONS AND PARAMETERS 44
AC AND DC STICK SCREEN SETUP, FUNCTIONS AND PARAMETERS 47
BACKGROUND MENU SCREEN SETUP AND PARMETERS OF OPERATION 49
TIG ARC STARTING, REMOTE FUNCTIONS AND OPERATION 50
EXPLANATION OF TIG PARAMETERS, FUNCTIONS AND WELDING TERMS 52
EXPLANATION OF STICK PARAMETERS, FUNCTIONS AND WELDING TERMS 59
TORCH PARTS AND ASSEMBLY 61
7 PIN CONNECTOR PINOUT AND INFORMATION FOR REMOTE 63
TROUBLE SHOOTING: COMMON WELDING ISSUES 64
TROUBLE SHOOTING: ERROR CODES 65
MAINTENANCE 66
IMPORTANT!
Before operating the welder, read this manual from beginning to end. A thorough read-through of this manual is important to
help guide you in the safe and competent operation of the welder. This welder is a complex machine with many features that
new owners or users may not understand or be familiar with. The manual is written in a way that builds knowledge upon pre-
vious information presented in the manual. If sections are randomly read through, details of important information will be
missed. In certain sections, where details of operation may overlap, some information may be repeated from previous sec-
tions to highlight continuity between different functions and settings. Though some general welding information is given to
illustrate the parameters and functions of the welder, the manual is not meant to train or instruct in welding. The manual’s
scope and intent is to guide the professional user in safe use of the basic parameters and functions of the welder. Any ex-
plicit setting or detail offered in this manual is intended as a general guide, or a starting point, and should not be construed to
be a nal setting to be applied in any or all circumstances.
To Next Page
Loading...
