To Next PageTo Next Page
Need help?Do you have a question about the Everlast Typhoon 330 and is the answer not in the manual?
Important notices, California Proposition 65 warning, and operational advice.
Steps for immediate actions, setup, and warranty claim procedures.
Contact details for support and warranty service, and information on warranty policies.
Detailed technical specifications including voltage, amperage, duty cycle, and dimensions.
Guide for unpacking, assembling the welder, and performing initial checks.
Instructions for electrical wiring and connecting the shielding gas supply.
Best practices for selecting and preparing tungsten for TIG welding.
Identification and explanation of front and rear panel controls, connectors, and indicators.
How to navigate menus and adjust parameters in manual welding mode.
Guide to using the synergic setup function for simplified parameter selection.
Accessing and adjusting hidden preferences and monitoring system temperatures.
Setup, functions, and parameters for AC TIG welding, including pulse and spot weld.
Setup, functions, and parameters for DC TIG welding, including pulse and spot weld.
Setup, functions, and parameters for AC and DC stick welding.
Methods for initiating the arc and using remote controls for TIG welding.
Detailed explanation of TIG parameters like AC Balance, Frequency, and Pulse.
Explanation of stick welding parameters like Hot Start, Arc Force, and Polarity.
Identification and resolution of common welding problems.
Listing and explanation of error codes displayed by the unit.
Procedures for cleaning and maintaining the welder for optimal service life.
General| Efficiency | 85% |
|---|---|
| Power Factor | 0.93 |
| Welding Processes | MIG, TIG |
| Input Current | 32A |
| Output Current Range | 5-330A |
| Output Current | 330A |
| Duty Cycle | 60% at 330A |
