evertz 5600ACO2 - Network Configuration; SNMP Configuration

Model 5600ACO2 Automatic Changeover Unit
4.3.1. Network Configuration
1) Network Configuration - set the IP parameters for this 5600ACO2
ip address: 192.168.1.200
netmask address: 255.255.255.0
gateway: 0.0.0.0
broadcast address: 192.168.1.255
DHCP enabled: False
----------------------------------
(1) Set IP Address
(2) Set Netmask
(3) Set Gateway
(4) Set Broadcast Address
(5) Use DHCP
(S) Save and exit
(X) Exit without saving
4.3.2. SNMP Configuration
2) SNMP Configuration – set the TRAP destination IP address which originate at this 5600ACO2 (if
enabled)
---------------------------------------------------
Trap Destination 1: 192.168.1.88
---------------------------------------------------
(1) Set Trap IP Address
(2) Remove Trap IP Address
(S) Save and exit
(X) Exit without saving
Page 4-6
Revision 1.3 TECHNICAL DESCRIPTION