Topaz Router
Revision 2.0 Page 11
3. GENERAL DESCRIPTION
3.1. INTRODUCTION
The Topaz series are small routing switchers ideal for simple switching applications. The Topaz
routers are available in a range of sizes and cover most signal formats.
Each router format: high definition (HD), standard definition (SD), analog video (AV), and analog audio
(AA), is a stand-alone unit. They use external power ‘bricks’ and two such units can be used to provide
a redundant PSU solution. A controller is built into each router. Options include the redundant PSU and
rear mount PSU carrier trays.
3.1.1.1. Products Currently Available
QT-SD-1616 Standard Definition, 16x16, 2U
QT-SD-3232 Standard Definition, 32x32, 2U
QT-HD-1616 High or Standard Definition, 16x16, 2U
QT-HD-3232 High or Standard Definition, 32x32, 2U
QT-AA-1616 Analog Audio, 16x16, 2U
QT-AA-3232 Analog Audio, 32x32, 2U
QT-AV-1616 Analog Video, 16x16, 2U
QT-AV-3232 Analog Video, 32x32, 2U
3.1.1.2. Options
QT-PS Additional PSU for backup or as a spare
QT-TR PSU mounting tray, main/right-hand, fitted to rear of QT router
QT-TL PSU mounting tray, backup/left-hand, fitted to rear of QT router
Units may be stacked together to form multi-level (video plus audio) routers. A local control panel may
be attached in place of the blank front panel, usually as a factory installed option.
The internal controller supports Q-Link and is compatible with any other Quartz router or any of the
standard Quartz remote control panels.
Routers are configured using the WinSetup program but a default configuration will have been factory
installed.
To Next Page
Loading...
