evertz Topaz - Unwanted Residual Effects; Control Specs; Switching Reference; Power Specs

Topaz Router
Page 18 Revision 2.0
Path Length, Typical: 13ns typical
4.1.6. Unwanted Residual Effects
Crosstalk, at 5.5MHz worst case: -60dB
Noise to 5.5Mz: -70dBrms
4.1.7. Control Specs
Q-Link to Remote Panels: 75Ω video cable
Max. Length: 500m
Serial RS232/422:
Connector: D9 socket
Ethernet: RJ45
4.1.8. Switching Reference
Reference Inputs: Analog 625 or 525
Signal Level: 1V p-p +6dB, -3dB
Impedance: 75 Ω
Switching Line: Lines 6/319 (625)
Lines 10/273 (525)
4.1.9. Power Specs
Supply, external: Auto ranging 100 to 240V AC 50/60Hz
Power Consumption: 20W
Connections: Two pin bayonet locking
Power Fail Alarm Output:
Relay contact: Rated 250mA, 50V
Connector: Screw terminals
Redundant PSU: Optional
4.1.10. Physical Specs
Height: 3.5” (90mm)
Width: 19” (483mm)
Depth: 4.75” (260mm)
Weight:
Frame: 1.45kg
PSU: 0.4kg
Operating temp. (ambient): 0-40°C
Specification maintained (ambient): 10-30°C
Humidity: 10-90% non-condensing
Ventilation: Natural convection