evertz Topaz - Technical Specifications; Qt-1616 N, Qt-3232 N Technical Description; Configuration; Analog Video Inputs

Topaz Router
Revision 2.0 Page 17
4. TECHNICAL SPECIFICATIONS
4.1. QT-1616N, QT-3232N TECHNICAL DESCRIPTION
4.1.1. Configuration
Inputs/Outputs: Fixed at 16x16 or 32x32
4.1.2. Analog Video Inputs
Nominal Signal Level:
Video Signal: 1V p-p
Sync Pulse (separate H+V): 2V p-p
Max Signal level:
DC restored Inputs
Video Signal: +6dB
Sync Pulse (separate H+V): 2.5V p-p
DC coupled Inputs
Video: ±0.7V
Impedance: 75Ω Terminating
Return Loss, 5-270MHz: 40dB
DC on input (DC restored): ±3V
Connectors: BNC per IEC 61169-8 Annex A
4.1.3. Analog Video Outputs
Impedance: 75 Ω
Return Loss to 5.5MHz: 40dB
DC on output: ±50mV
Connectors: BNC per IEC 61169-8 Annex A
4.1.4. Insertion Gain
Insertion Gain: ±0.1dB
Gain Spread Between Inputs: ±0.05dB
4.1.5. Distortion
HF Response
15kHz to 5.5MHz: ±0.1dB
5.5 to 10MHz: ±0.2dB
10MHz to 100MHz: +0.5, -1.0dB
Above 100MHz: smooth roll off
LF Response, tilt at 50Hz: ±0.5%
Y-C Gain Inequality: ±0.5%
Y-C Delay Inequality: ±5ns
Differential Gain (10-90% APL): 0.25%
Differential Phase (10-90% APL): 0.15°