13
Cleaning of the printer interior
Use Pre-Saturated Cards (UltraClean Cleaning Kit Part Number: A5011).
Cleaning cycle: every 1000 cards.
The Pebble printer is fitted with a cleaning alert, which is activated every
1000 inserted cards. The cleaning alert light switches on.
If the printer has not been cleaned after the cleaning light has come on,
it will begin to flash when a further 200 cards have been inserted.
Remove the feeder
from the printer as
shown.
Remove the
cards present in
the feeder.
Take a pre-saturated clea-
ning card and insert it in
the feeder as shown.
Check that the
card thickness is
set to MAX.
Replace the
feeder in the
printer.
CLIC
Cleaning
To Next Page
Loading...
