16
Following a cleaning cycle, wait two minutes for the cleaner to
evaporate completely before using the printer again.
Maintenance of the cleaning rollers
Use the cleaning wipes (UltraClean Cleaning Kit Part Number A5011).
Cleaning cycle: before inserting every new ribbon.
Remove the
cleaning roller
from the printer.
Open the printer cover. If there is
one, remove the ribbon and locate
the cleaning roller.
When the roller is dry, put it back in
the printer and close the cover.
Clean the roller with a wipe from
your cleaning kit. Eliminate all dust
by lightly rubbing the wipe on the
surface of the roller.
Cleaning
To Next Page
Loading...
