EXCELL PRECISION CO., LTD
02005302 ZSME300000237 11
1-7 Error Messages
⇒
Unable to read the EEPROM.
(The EEPROM is not mounted yet, or the circuit near EEPROM is broken.)
⇒
Initial zero is higher than the zero range when switching the scale on.
⇒
Initial zero is lower than the zero range when switching the scale on.
⇒
Initial zero is unstable for 10 seconds. (If appears, please press
ON/ZERO
.)
(OMIL approval models)
⇒
Internal value is below Zero.
⇒
A/D IC malfunction (cannot read A/D value). The load cell may not be
connected to the indicator correctly.
⇒
The weight of the object is over 9 divisions of the maximum capacity.
⇒
A/D IC value is over the maximum range.
- - - - - ⇒
If the negative weight is over 20 divisions and there is no T or PT, the display
shows “- - - - - -” (OMIL approval models)
1-8 Weight UNIT
(kg) 1 g = 0.001 kg
(g) 1 g = 1 g
(lb) 1 g = 0.002204623 lb
(lb/oz) 1 g = 0.03527396 oz
(oz) 1 g = 0.03527396 oz
(GN) 1 g = 15.432358 GN
(dwt) 1 g = 0.6430149 dwt
(ct) 1 g = 5 ct
To Next Page
Loading...
Need help?
General
