EXCELL PRECISION CO., LTD
02005302 ZSME300000237 8
1-5 Keypad Function
OFF
KEY
Press the
OFF
key to switch the indicator off.
ON/ZERO
KEY
The
ON/ZERO
key acts as the power-on key when power is off or as the zero return
function when power is on. If the weighing value is within the range of zero return, it can be
re-zeroed and tare cancelled.( When weighing value returns to zero, the
Æ0Å will appear).
Range of Zero Balance: OIML&NTEP is ±2% Full Scale, and Sri Lanka is ±4% Full Scale.
TARE
KEY
Place the container onto the scale, until the weight value is stable, press
TARE/PT
key for
zero return and the NET indication is shown on the display.
Place the object onto the container and the display shows the net weight value of the object.
Remove both object and container, and negative value of the container will show on
the display.
Press
TARE/PT
again to clear “tare value”. The scale returns to zero and NET indication
goes off
.
Tare can be continuously done until tare value=full load capacity
Continuous Tare Æ Press
TARE/PT
key for continuous weight increase/decrease on
platter.
If there is Tare, the pre-tare cannot be done. If there is pre-tare first, and the tare weight
more than pre-tare weight, Tare can be done.
No Tare can be done under gross weight display mode.
UNITS
KEY
Press the
UNITS
key to switch weight UNITS; the display icons will indicate the active
UNITS.
NET | GROSS
KEY
In the Tare mode, the screen displays the “
TARE
” icon; press the
NET | GROSS
key to switch
between the “Net value” and the “Gross value”.
When the ”GROSS” arrow
6
shows up, the Gross Weight in the screen = Tare weight +
Net weight, meanwhile, keys except the
NET | GROSS
KEY, have no response.
To Next Page
Loading...
Need help?
General
