Excell SI-132 Service Manual

EXCELL PRECISION CO., LTD
02005302 ZSME300000237 48
Use ON/ ZERO or UNITS keys
to enter the parameter
Press
TARE to exit the
environment parameters
Use
ON/ ZERO or UNITS keys
to enter the parameter
Use ON/ ZERO or UNITS keys
to enter the parameter
3-4-1 Environment Parameters
 If parameters are changed in , then will be revised automatically
ON/ZERO key ⇒ Upward key (0~9 digit entry)
UNITS key ⇒ Downward key (0~9 digit entry)
TARE key ⇒ Move cursor rightward
NET/GROSS key ⇒ Move cursor leftward
Press TARE
Zero-return
Using
ON/ZERO or UNITS to enter
Default setting = 0
0
⇒ show all 5 ⇒ within 5 d
1
⇒ within 1 d 6 ⇒ within 6 d
2
⇒ within 2 d 7 ⇒ within 7 d
3
⇒ within 3 d 8 ⇒ within 8 d
4
⇒ within 4 d 9 ⇒ within 9 d
 Weight value must over 1/3 full scale
Stabilization range
Display shows the last setting
Filter setting
Display shows the last setting.
Enter “00”
Zero-return
The display shows the last setting
Weighing Filter setting
Use
ON/ZERO or UNITS keys to input the
parameters. Default setting = 5
Range 0 ~ 9, the larger the number, the
faster the filter response. Fast response
could lead to display weight instability.
Stabilization range
Use
ON/ZERO or UNITS keys to input the
parameters. Default setting = 0
Parameter 0 ~ 9, the larger the number
the more stable the weight.
Press TARE
Press TARE
Press TARE

Excell SI-132 Specifications

General

Brand	Excell
Model	SI-132
Category	Scales
Language	English