EXCELL PRECISION CO., LTD
02005302 ZSME300000237 10
Press
UNITS
key
Press
UNITS
key
Press
UNITS
key
Press
UNITS
key
1-6 Self-Test Mode
y Set the switch SWA1 on the bottom of machine to the LOCK position.
When power is off, hold
NET/GROSS
, and press
ON/ZERO
key,
Wait till display shows to enter “Self-Test Mode”.
INTERNAL VALUE MODE
(
must hook up Load Cell to test)
c Press
TARE
to enter, and the display shows internal value
d Please check whether the internal value has changed obviously with weight changing.
e Please check the backlight.
f Press
ON/ZERO
key to back to the last screen , the display shows
KEYPAD TEST MODE
c Press
TARE/ PT
to enter, display shows
Keypad’s internal code:
TARE
key= 07 、
UNITS
key= 06、
NET/GROSS
key=05
d Press
ON/ZERO
key to back to the last screen , the display shows
FIRMWARE VERSION DISPLAY MODE
c Press
TARE/ PT
to enter , display shows the firmware version ,
d Press
TARE/ PT
key again, the display shows maintenance number for 2 secs
e Press
ON/ZERO
key to back to the last screen, display shows
BACK TO THE LAST SCREEN
Press
TARE/ PT
key to exit self-test mode, the scale will restart automatically.
Press
ON/ZERO
key
Press
ON/ZERO
key
Press
ON/ZERO
key
Press
ON/ZERO
key
To Next Page
Loading...
Need help?
General
