Excell SI-132 Service Manual

EXCELL PRECISION CO., LTD
02005302 ZSME300000237 29
2-3-7 Reset Auto Transmission

When the value of “Auto transmission at zero” set as , the “Auto transmission at
zero” function is not available. Because when the scale is at zero and keeping stable, the
data are keeping transmitted, and that would be the same as “Continuous Transmission”.
ON/ZERO key ⇒ Upward key (0~9 digit entry)
UNITS key ⇒ Downward key (0~9 digit entry)
TARE key ⇒ Move cursor rightward
NET/GROSS key ⇒ Move cursor leftward
Resetting auto transmission
Use
ON/ZERO or UNITS keys to key in the
desired parameters:
= 00 division of weight value
= 01 division of weight value
= 99 divisions of weight value
Press TARE key
Use
ON/ZERO or UNITS keys
to key in the desired
parameters
Press
TARE key
Key in the parameter “00”
Press
TARE key to exit
Resetting auto transmission
The LCD shows the last setting
 Default setting:

Excell SI-132 Specifications

General

Brand	Excell
Model	SI-132
Category	Scales
Language	English