--------------------------------------------------------------------------
11M# allows the No.M C.O. lines in Operator mode.
Description: When the C.O. line is in operator mode, the Operator mode ringing extension (setting
refer3.8.2&3.8.3) will be ringing when calling in, the caller can hear the ringing tone.
NOTE: Operator mode or auto-attendant mode, certain C.O. line just can be in one status,
but if set the certain C.O. line into auto-attendant mode, the operator mode will be canceled
automatically.
3.4.4 CRBT (Directly ringing while play OGM Process in Auto-attendant Mode)
NOTE: 1、This is a new mode; allow you to call in form outside and hear OGM while the
system directly to ringing the Assignment extensions without dialing any
extension numbers.
2、You should set the C.O. line in Auto-attendant mode first.
3、In the mode we suggest you record the OGM into one paragraph.
Format: 1 67 # this is default setting
Description: disable directly ringing extensions while playing OGM in auto-attendant mode.
Format: 1 6 7 0 #
Description: enable directly ringing extensions while playing OGM in auto-attendant mode, and
the ringing extensions is the first& the second operators
Format: 1 6 7 6 #
Description: enable directly ringing extensions while playing OGM in auto-attendant mode, The
system will call the operator mode Ringing Extensions .
3.4.5 Day/night Setting in Auto-attendant Mode
Format: 0 4 4 0 # Enable auto-attendant(OGM) in day and night
(this is default setting)
0 4 4 1 # Enable auto-attendant in day (means in night is operator mode )
0 4 4 2 # Enable auto-attendant in night (means in day is operator mode )
Example: set no.1-3 C.O. line in day is operator mode and in night is auto-attendant mode, no.4
C.O. line is operator mode in day and night, that input 10#, 1104# to set no.1-3 C.O.
line is in auto-attendant mode and set no.4 C.O. line is in operator mode, and then
input 0442# to set the system into auto-attendant in night.
Description: above setting should be used together with the C.O. line attendant mode, that means
should be set the C.O. line attendant mode to allow C.O. line to use auto-attendant
(OGM) and then can set above settings.
Note: If don’t use day/night mode, that will be no need set these settings.
To Next Page
Loading...
