Excelltel CDX-CS - 3.6.3 Called extension No Answer Process; 3.7 Operator Setting; 3.7.1 Operator Setting

--------------------------------------------------------------------------
P16
Description: when the outside caller calling the extension in auto-attendant mode, and the
extension is busy, then the system cut off the line; this is the default setting.
Format: 1650#
Description: when the called extension is busy, the call transferred to operator.
Format: 1656#
Description: when the called extension is busy, the call transferred to the operator mode ringing
extension.
Format: 1655# when the called extension is busy, system send prompt tone to the extension
Above setting just for one paragraph OGM mode.
3.6.3 Called extension No Answer Process
Format: 166#
Description: when the called extension is no answer, the C.O. line will be cut off;
this is the default setting.
Format: 1660#
Description: when the called extension is no answer, the call transferred to operator.
Format: 1666#
Description: when the called extension is no answer, the calling transferred to the operator mode
ringing extension.
Above setting just for one paragraph OGM mode.
3.7 Operator Setting
3.7.1 Operator Setting
Format: 15N #
Explanation: N: the Ext. line No., N=01-16
Description: To assign any Ext as the operator. In the default setting, EXT602 is the operator.
Example: Setting Ext.12 as operator
3.7.2 Fast Dialing Operator
Format: 1 5 2 0 # default setting
Description: enable the extensions dialing call-operator code to call the operator quickly.
Format: 1 5 2 1 #
Description: disable the extensions to dialing call-operator code to call the operator quickly.