--------------------------------------------------------------------------
3.5 OGM Recording/Monitoring
3.5.1 OGM Recording（For CS/TS Series）
Format: 1 2 #
Description: Used to record an outgoing message for Direct Inward System Access (DISA).
3.5.2 OGM Monitoring（For CS/TS Series）
Format: 1 3 #
Description: Play and monitor the recorded OGM.
3.5.3 System Music Monitoring（For CS/TS Series）
Format: 14 #
Description: Perform the music on holding melody or test the quality of telephone unit.
3.5.4 OGM Recording(For CS+/TS+ Series）
Format: 1 2 M #
Explanation: M=1,2,3 the paragraph of the OGM
Description: Used to record an outgoing message for Direct Inward System Access(DISA).
OGM 1 recording (8 seconds), this is the first OGM, usually it is for company greeting, for
example, you may record ”This is ABC company, Pls dial extension number or dial “0” for
operator. Thanks you for calling.”
OGM 2 recording (6 seconds), this is the second OGM, usually it is for C.O. line dial
extension and this extension is busy, if you want to transfer this calling to other extension,
you may record “Sorry! This extension is busy. Please dial other extension number or dial
“0” for operator.”
OGM 3 recording (6 seconds), this is the third OGM, usually it is for C.O. line dial extension
and this extension no answer, you may record “Sorry! This extension do not answer, Please
dial other extension number or dial “0” for operator.”
Example: Recording the first paragraph of the OGM, then in programming status you can input
121#, after hear “du”, you can speak in telephone and will be recorded into OGM.
1. The recording time is limited, “du” is heard to start recording and another “du” to end
recording;
2. The new message will overwrite the old one;
3. Please use high quality telephone to ensure high quality of recording;
4. If the caller dials a number before the system finishes playing the message, the system will
To Next Page
Loading...
