--------------------------------------------------------------------------
2. If the Ext is at Direct-Dialing-Out mode, you should input: * # 7 M.
3. The monitor is responsible for the legal issues resulting from the operation.
4.20 Manager/Secretary function( call forwarding directly)
Format: [*] # 81 abcd then hang up
Description: Use manager’s Ext. to make this operation, abcd is the Secretary Ext. number. Allow
the manager Ext user to transfer incoming calls automatically to Secretary Ext.
Format: [*] # 81 # then hang up to clear this function
4.21 Call Forwarding When Ext is Busy or Nobody Available
Format: [*] # 82 abcd then hang up: If a Ext is busy or nobody available after 20 seconds (refer
3.13.3), the incoming call will be transferred to desired Ext. automatically.
[*] # 82 # then hung up: to clear this function.
Explanatio
n: <abcd> i
s desired
E
xt numb
er
.
Example: When the Ext.602 is busy or no answer, then he want to transfer the incoming calls to
the operator Ext.606 ,just to pick up Ext. 602 ,input #82606 after hear Du you can hang
up.
When power failure, refer to 3.14.3, this setting will be stored or not.
4.22 Setting Don’t Disturb / Clear
Format: [*] # 8 3 setting Don’t disturb
Description: If “Don’t Disturb” is set for the extension, then this extension will not ring.
Format: Pick-up the handset to clear this function
4.23 Call All Extension(Emergency calling)
Format: [*] # 8 8
Description: after this operation, all extension ringing and can hear the calling.
The command can be inputted only by Programming Extensions.
4.24 Clear Extension Function Setting
Format: [*] # 8 0
Description: This command will clear all function that extension set, such as No disturbing/Call
divert/Call forwarding/C.O. line booking/Alarm clock etc. This command has no effect
to other extension.
To Next Page
Loading...
