--------------------------------------------------------------------------
Format: 3 1 M N 1 #
Description: Disable No. N Ext. ring when calling of No.M C.O. line come in while system in night
mode.
Format: 3 1 M #
Description: Disable all Exts ring when calling of No.M C.O. line come in while system in night
mode.
Example: Setting Ext.603 and Ext.611 ringing when the C.O. line 2 come in while the system in
night mode, then input 312#, 312030#, 312110#.
1. Up to 16 Exts are allowed to ring at the same time for one C.O. line while system in either
day or night mode .that mean you can repeat input 30MN0# or 31MN0# for 16
times.
2．Before you setting a certain ringing extension, we suggest you better to disable all the
Exts ring for this C.O. line.
3．This function must be in Operator Mode.
4. This function only for C.O. line Incoming call. The extension which is not set ringing will
ring under Intercom Calling, Call Transfer.
5. This function is one way to set some extensions for not disturbed.
6. If you not use day/night function, you needn’t to set night settings.
3.9 Dialing-out Mode Setting
Format: 21#:
Description: Indirect-Dialing-Out mode for all the Exts (dialing 9 for outgoing ).
Format: 2N1#
Explanation: N: the Ext. line No., N = 01 - 16
Description: Indirect-Dialing-Out mode for Ext. N (dialing 9 for outgoing).
Example: Set Indirect-Dialing-Out mode for Ext.605, then input 2051#
In default setting, all extensions are in Indirect-Dialing-Out mode.
Format: 20#
Description: set Direct-Dialing-Out mode for all the Exts.
Format: 2N0#
Explanation: N: the Ext. line No., N = 01 - 16
To Next Page
Loading...
