--------------------------------------------------------------------------
3.11 Exts. Using C.O.Lines Access
3.11.1 Assign Exts. Outgoing to Certain C.O. Line / to Clear in day mode
Format: 70MN0# Assign the extensions N outgoing to use the certain C.O. line (M) in
daytime.
70M0# All extensions can use co line M in day mode.
70M1# All extensions can not use co line M in day mode.
70MN1# to restrict the EXT.N to use C.O line M in day mode
70N2# Allow extension N use all C.O.lines in day mode.
70N3# to restrict EXT.N use all C.O.lines in day mode.
3.11.2 Assign Exts. Outgoing to Certain C.O.Line / to Clear in night mode
Note: If you not use day/night function, you needn’t to set these settings.
Format: 71MN0# Assign the extensions N outgoing to use the certain C.O. line (M) in
night .
71M0# All extensions can use co line M in night mode.
71M1# All extensions can not use co line M in night mode
71MN1# to restrict the EXT.N to use C.O line M in night mode.
71N2# Allow extension N use all C.O.lines in night mode.
71N3# to restrict EXT.N use all C.O.lines in night mode.
Explanation: M: C.O. line No, M =1-4 N: the Ext. series No., N = 01 – 16
Description: This functions allow you to assign certain CO line exclusively be accessed by certain
extensions for outgoing calls and other extensions can’t use it for outgoing calls.
1. This function is for the outgoing call and can’t change the function of C.O line Ringing
Assignment. .
2. Eg1: EXT603 can’t use C.O line 2, Ext.606 & Ext.608 can use C.O line 1 in daytime ,
you can set as follows: 702031# , 701060# ,701080#.
3. Eg2: C.O line 1 can use at night mode by Ext 601, C.O line 2 can use by Ext
607. Ext 608 .Ext 616 in night , you can set as follows: 7111#、7121#、711010#、712070#、
712080#、712160#。
3.12 Flexible coding
Format: 9000#
Description: return to the Exts number of the default setting, that is: from 601 to 602 603… 616
one by one, etc.
Format: 9Nabcd#
To Next Page
Loading...
