--------------------------------------------------------------------------
3.8 Operator Attendant Ringing Setting
3.8.1 Ringing mode when all the ringing extensions is busy
Format: 1 8 8 0 #
Description: While the C.O. line coming in, and all the ringing extensions assigned to C.O. line is
busy , the system will send waiting call beep to the ringing extensions for every five
seconds, these extensions is assigned to the C.O. line, this is default setting.
Format: 1 8 8 1 #
Description: While the C.O. line come in, and all the ringing extensions assigned to C.O. line is
busy, instead of sending the waiting call beep, the system will find the first idle
extension begin from Ext. 601 to Ext. 696 in sequence then ringing it.
These setting will take effect only when the system in operator mode
3.8.2 Ringing Extensions Assignment/ to Cancel in Day mode
Format: 3 0 M N 0 #
Explanation: M: the C.O. line No. M=1 – 8
N: the Ext. series No. N= 01 –16 (N=01 means Ext.601 …… N=16 means Ext.616)
Description: In operator mode when calling of No.M C.O. line come in and system in day mode(in
default setting system in day mode), No. N Ext. will ring at the same time.
In default setting only Ext601, 602 will ring.
Format: 3 0 M N 1 #
Description: Disable No. N Ext. ring when calling of No. M C.O. line come in while system in day
mode.
Format: 3 0 M #
Description: Disable all Exts ring when calling of No. M C.O. line come in while system in day
mode.
Example: Setting Ext.605 and Ext.612 and EXT.616 ringing when the C.O. line 6 come in while the
system in day mode, then input 306#,306050#,306120#,306160#.
3.8.3 Ringing Extensions Assignment/ to Cancel in Night Mode
Format: 3 1 M N 0 #
Description: In operator mode when calling of No. M C.O. line come in and system in night mode,
Exts N will ring at the same time.
In default setting only Ext601, 602 will ring.
To Next Page
Loading...
