--------------------------------------------------------------------------
came back to the C.O. line .
3. You can uniform manage the system by using C.O. line Restriction and Secretary
Function, Such as: the operator uniform books the long distance calls, then transfer to the
needed.
4.9 Call Pickup
4.9.1 Pick up a certain ringing Extension
Format: (*) # 3 + ext. number
Description: Allows you to answer the calling that is ringing at the certain Ext.
Internal call also can be picked up.
4.9.2 General Call Pickup
Format: (*) # 9 (General call pickup)
Description: Allows you to answer an incoming call (direct or transferred ) that is ringing at
another Ext. When several Ext. ringing at the same time , using this way you will
pick up a call according to follow sequence:
1
th
、External call in 2
th
、C.O.line call transfer 3th 、 Receiver calling(Call on
holding) 4
th
、Doorphone calling 5
th
、Intercom calling
Example: A is on seat of the Ext.602, B is on the seat the Ext.618. Ext.617 is ringing and B is out
of room, A pick up hangset of Ext.602, press #9 to pick up the incoming call.
We suggest prudence to use this operation , because it is easy to pick up a call that
you are not expected.
4.10 Call Transfer (External Call)
Format: Pat the hook (or press the FLASH button) then dial the Ext. number..
Description: 1. Allow you to transfer an incoming call to another Ext.
2. The Flash time can be set.
3. transfer operator have two modes, please refer to 3.14.1
4、In the process of the transfer, the C.O. line will hear holding music.
5、when the Ext. number is 0 ,then you will transfer to the operator.
Example: Ext.607 is talking to C.O. line and want to transfer the C.O. line to Ext.612. Then Ext.605
can transfer the incoming call to Ext .612 by patting the hook ( or pressing the FLASH ) and dialing
612.
There may be following 8 cases after a call is transferred from A to B:
To Next Page
Loading...
