Remote Control Commands
Variable Attenuator 95
Specific commands-Quick Reference Command Tree
D
Description This command controls the shutter, which can block optical
continuity.
Syntax D<wsp><numeric>
Parameters The <numeric> parameter can be
“0” to open the shutter
“1” to close the shutter
Example D 1
Note This command cannot be issued while a program is running.
The D command is similar to the OUTP:STAT command.
D?
Description This query returns the current shutter state.
Syntax D?
Response The shutter state in the format
“0” if the shutter is optically open
“1” if the shutter is optically close
Example D?
Note The D? command is similar to the OUTP:STAT? command.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
