Maintenance
Variable Attenuator 69
Recalibrating the Unit
Recalibrating the Unit
If a calibration due date was not indicated by EXFO on the calibration label,
this means that the calibration certificate for your FVA-3100 Variable
Attenuator has been modified in conformity with the ISO/IEC 17025
Standard.
EXFO recommends that an annual calibration be performed on your
FVA-3100 Variable Attenuator to ensure that it remains within the published
specifications. However, as prescribed by the ISO/IEC 17025 Standard, this
date can only be set by you.
You should indicate the calibration due date in the space provided on the
calibration label.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
