EasyManua.ls Logo

Extel WESV 82500 - Safety and Compliance Warnings; Additional Safety Guidelines; FCC;CE Compliance Warnings

Extel WESV 82500
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
CFI EXTEL WESV 82500 - 12/2011 - V1
*%
CFI EXTEL WESV 82500 - 12/2011 - V1
*%
12. WARNING FCC/CE
Note : This equipment has been tested and found compliant with the limits of a Class B
appliance, according to the European standards in force. These limits are designed to supply
a reasonable protection against the interference in a residential installation. This equipment,
uses and can radiate radio frequency energy and if it is not installed and used according to
the instructions, may interfere with radio communications.
Nevertheless, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna
• Increase the distance between the equipment and receiver
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected
Notification FCC/CE
Some rules have to be respected: The appliances using radio waves must be
compliant with rules and regulations. The power of the transmitter is limited.
A receiver cannot respond to more than one signal at a time and thus can be
interfered by radio signals close to their operation frequencies.
11. SAFETY INSTRUCTIONS
The damages caused by the non-compliance to the manual lead to the expiration of the
warranty. We will not assume any responsibility for the resulting damage!
We will not assume any responsibility concerning any damage, to the goods or people,
caused by improper handling or by non compliance with the safety instructions.
This product has been manufactured in compliance with safety instructions. In order to keep
this status and ensuring the best operation of the product, the user must respect the safety
instructions and warnings contained in this manual.
The user of this system is responsible for checking whether the video surveillance is
compliant with the law in force in the country of use.
This symbol indicates a risk of electric shock or a risk of short circuit
- You should only use this product within a voltage range between: 100-240 Volts and 50-60
hertz. Never intend to use this product with a different voltage.
- Make sure all electrical connections of the system are compliant with instructions of use.
- In commercial establishments, make sure to respect the rules for preventing accidents with
the electrical installations.
- In schools, training institutions and workshops… the presence of a qualified personnel is
necessary to control the operation of electronic appliances.
-Respect the instructions of use of other appliances connected to the system. (video
recorder, TV, PC for example)
- Please contact an experienced person in case of doubt concerning the mode of operation
or the safety of the appliances.
- Never connect or disconnect the electrical appliances with wet hands.
- When installing this product, check the power supply cables are not liable to be damaged.
- Never replace the damaged electrical cables by yourself! In this case, remove them and
contact an experienced person.
CAUTION
Informs the user about the presence of important instruc-
tions concerning the use and the maintenance (repair) in the
documentation supplied with the appliance.
Informs the user about the presence of “hazardous
voltages” non-isolated inside the housing of the product,
being sufficiently high to represent a risk of electrocution
for people.

Table of Contents

Related product manuals