CLEANING THE UTILITY
23
ENGLISH
CLEANING THE UTILITY13.
Some images could be o set from the original model.
DAILY
gure 47
gure 48 gure 49 gure 50
Burn pot: remove the burn pot
from the relevant compartment
and free the holes using the
appropriate re irons supplied,
remove the ash from the burn
pot using a suction device. Suck
the ash deposited in the burn pot
compartment.
Scrapers: use the scrapers, using an upward movement (for models with upper scrapers) or pulling
and pushing the same (for the inserts and models with front scrapers).
WEEKLY Cleaning the ash drawer: empty the ash drawer every week or when required. For the inserts, suck with relevant ash suction
device.
1
3
2
4
gure 51
*
gure 52
Make sure that the ash is completely cold before emptying it into a suitable container.
*Optionale available in the company, for info please contact the company.
To Next Page
Loading...
