ExtremeSwitching 5520 Series Overview
5520-24T Switch Features on page 14
5520-24W Switch Features on page 15
5520-24X Switch Features on page 16
5520-12MW-36W Switch Features on page 17
5520-48T Switch Features on page 18
5520-48W Switch Features on page 19
5520-48SE Switch Features on page 20
The ExtremeSwitching 5520 Series is a family of high-performance aggregation switches. The 5520
Series universal hardware provides end-to-end secure network segmentation, in addition to advanced
policy capabilities, and oers a user-selectable choice of Extreme’s flagship switch operating systems.
The 5520 Series includes 24- and 48-port 1 Gigabit models, 1/2.5/5 Gigabit multi-rate models, as well as
a 24-port 10 Gigabit model. The family also
oers 30/60/90W PoE, and supports 10G and 25G modular
uplinks for flexible linkage to other switches or devices over a range of media.
The 10/100/1000Base-T ports on the 5520-24W/12MW-36W/48T/48W models can operate in half-
duplex mode when operating at 10Mbps or 100Mbps. Half-duplex is not supported on these ports when
operating at 1Gbps.
The 5520 Series includes the following models:
• 5520-24T Switch Features on page 14
• 5520-24W Switch Features on page 15
• 5520-24X Switch Features on page 16
• 5520-12MW-36W Switch Features on page 17
• 5520-48T Switch Features on page 18
• 5520-48W Switch Features on page 19
• 5520-48SE Switch Features on page 20
Management
An RJ45 serial console port on the rear panel of the 5520 Series switch enables you to connect a
terminal and perform local management. An Ethernet management port can be used to connect the
system to a out of band management network for administration. Alternatively, you can use an Ethernet
cable to connect this port directly to a laptop to view and locally manage the switch configuration. The
Ethernet management port supports 10/100/1000 Mbps speeds.
12
ExtremeSwitching 5520 Series Hardware Installation Guide
To Next Page
Loading...
Need help?
General
