ShareLink Pro 500 • SIS Configuration and Control 33
Command ASCII Command
(Host to Device)
Response
(Device to Host)
Additional Description
HDCP
Set HDCP mode
ES1*X1^HDCP} HdcpS1*X1^]
Query HDCP mode
ES1HDCP} X1^]
HdcpS1*X1^]
(Verbose mode 2/3)
HDCP Authorized Device On
EE1*1HDCP} HdcpE1*1]
HDMI input reports as an HDCP
Authorized Device
HDCP Authorized Device Off
EE1*0HDCP} HdcpE1*0]
HDMI input reports as a non-HDCP
Authorized Device
Query HDCP Authorized Device
Status
EE1HDCP} X1%]
HdcpE1*X1%]
View HDCP authorized setting
(Verbose mode 2/3)
View input HDCP status
EI1HDCP} X1$]
HdcpI1*X1$]
View HDCP status on HDMI input
(Verbose mode 2/3)
View output HDCP status
EO1HDCP} X1$]
HdcpO1*X1$]
View HDCP status on HDMI output
(Verbose mode 2/3)
HDCP notification
Enable HDCP notification
EN1*1HDCP} HdcpN1*1]
Disable HDCP notification
EN1*0HDCP} HdcpN1*0]
Query HDCP notification setting
EN1HDCP} X1&]
HdcpN1*X1&]
View current HDCP notification setting
(Verbose mode 2/3)
Video Mute
Mute video to black
1*1B/b
Vmt1*1]
Mute video on HDMI output
Mute sync and video
1*2B/b
Vmt1*2]
Mute sync and video on HDMI output
Video unmute
1*0B/b
Vmt1*0]
Unmute video on HDMI output
View video mute
1B/b
X1*]
Vmt1*X1*]
View current video mute status
(Verbose mode 2/3)
KEY:
X1$ = HDCP status
0 = Not connected
1 = Not HDCP encrypted
2 = HDCP encrypted
X1% = HDCP authorized status
0 = HDCP authorize off
1 = HDCP authorize on (default)
X1^ = HDCP mode
0 = Follow input (default)
1 = Always encrypt
2 = Follow input with continuous DVI trials
3 = Always encrypt with continuous DVI trials
4 = Disable authentication
X1& = HDCP notification
0 = Black screen
1 = Green screen (default)
X1* = Video mute status
0 = Unmute (default)
1 = Mute video
2 = Mute sync
To Next Page
Loading...
