Room Scheduling System • Reference Information 66
VESA Mounting (TLS 1022T, TLP Pro 720T)
� Remove the back and base covers from the panel.
�
If necessary
, cut the zip tie holding the twisted pair cables to the panel base and remove
the cables.
�
Remove the four spanner drive security scr
ews holding the hinges to the panel.
�
Lift the panel away fr
om the base.
�
If necessary
, connect the cables and use a zip tie to secure them to the back of the
panel.
� Secure a VESA D 75 mm mount kit to the back of the panel. Follow the instructions
provided with the mounting kit.
To Next Page
Loading...
Need help?
General