Page 31 of 44
Create OEM Packager
The EZ3 Packager utility allows an OEM to distribute updates to EZ3Touch or EZ3PLC projects easily and quickly.
Using the utility, OEMs can package current project and/or firmware into a zip file for distribution to the end user
via email or the web. If you click on File > Create OEM Package, it will allow you to package the current EZ3 Panel
or EZ3 PLC project and/or the firmware into a zip file called a pack file for the distribution purposes. Benefits of
the utility include:
• OEMs save costs associated with the distribution of panel updates in the field (sending field service
personnel or mailing CDs).
• OEM Projects are protected since end users cannot modify the projects.
• The end user benefits from convenient, fast and easy updates without needing to purchase the EZTouch
Editor software.
Creating a Pack File:
1.
Use the EZ Series Editor Software to open the project you wish to distribute.
2.
Click on File > Create OEM Package. A dialog box similar to the one shown below
will appear. Select what
firmware you wish to include in the zip file. (Use Browse to locate the latest firmware versions if necessary.)
Enter any necessary OEM information you wish to include in the fields provided.
3. Use Browse to determine the file save location and OEM package name. Then click
Opening a Pack File:
A Pack File contains the following:
1. Updater application (comprising of the .exe and required dlls)
2. Project files (which would show up inside the Project folder when unzipped)
3. Firmware files (which would show up inside the Firmware folder when unzipped
To Next Page
Loading...
Need help?
General