CHAPTER G G - 7
Ignore password-protected archives. NOTE: Certain password-
protected archives are reported as suspected infections instead
of password-protected archives.
--preserveatime[={on,off,yes,no,1,0}]
Preserve the last access time of the file after it is scanned. If the
option is enabled, the last access time of the file does not
change when it is scanned. The option can be used for example
with some back-up systems that back up only files that have an
updated last access time field.
--raw[={on,off,yes,no,1,0}]
Write ESC character (\033) as is to output. By default ESC char-
acter is shown in reverse video as string “<ESC>”.
--riskware[={on,off,yes,no,1,0}]
Report riskware detections. Riskware is potential spyware. This
feature is available in selected products.
--riskware-action1={none|report,rename,delete|remove}
Primary action to take when riskware is found: report only (to ter-
minal and as an alert), rename, or delete/remove.
--riskware-action2={none|report,rename,delete|remove}
Secondary action to take if primary action fails. Parameters are
the same as for primary action.
--scanexecutables[={on,off,yes,no,1,0}]
Enable the executable scanning. If a file has any of user/group/
To Next Page
Loading...
Need help?
General
