FAAC B614 - Grounding the Door; Closing the Door

28
B614 27 532297 - Rev.D
1
8
2
2
8
27
4.9 GROUNDING THE DOOR
1. (27) With the supplied cable connect the door
and the base. Use the toothed washer and nut on
the base and on the door. Pay attention to the
insertion order indicated in the figure.
4.10 CLOSING THE DOOR
!
The door must be closed before operating the barrier,
even manually.
Handle the door carefully so as not to damage the
ground cable.
1. (28) Insert the lower slot of the door in its place
1, at the bottom of the box.
2. Close the door and secure it in place with screws
2 (provided).