FAAC B614 - Encoder; Arm Lights; Integrated Flashing Light; XF Radio Module

35
36
37
B614 33 532297 - Rev.D
N
L
6 A
PE
N
L
AC MAIN
J1
XF 433-868
J7
MAIN SWITCH
TRAFFIC
LAMP
LIGHT
BEAM
COM
BLR
BLG
J18
J21
ENCODER
The encoder wire is connected from the factory.

The encoder must always be connected in order for
the automation system to operate.
ARM LIGHTS
See the chapters § 8.4 for the connection.
INTEGRATED FLASHING LIGHT
35See the chapter § 8.5 for the connection.
XF RADIO MODULE
36See the chapter § 8.2 for the activation.
MAINS SUPPLY AND EARTHING
!
Do not remove the grounding done in the factory.
37Connect the power cable to the main switch,
using PE, N, L terminals.
Use a standard AWG 14 tripolar cable (not supplied).