Facility Explorer FX16 - Common Error Codes and Diagnostic Messages

FX16 Master Controller Technical Bulletin 39
Common Error Codes or Diagnostic Messages
Table 8 and Table 9 summarize the most common error codes
(identified by xx - xxxx) and diagnostic messages (identified by
F0-xxxx).
Table 10: Error Codes
Error Code Description
01 - xxxx
Unknown Object found in the Application
02 - xxxx
Too Many Objects found in the Application
08 - xxxx
Application size exceeds the limits
09 - xxxx
FX Slave Controllers Failure
17 - xxxx
Download Failed
41 - xxxx
Display Database Error
42 - xxxx
Display CFG Database Error
44 - xxxx
Application Missing (without the application status)
50 - xxxx
FX Programming Key Generic Error
51 - xxxx
FX Programming Key CustomerID Mismatch
52 - xxxx
FX Programming Key is not Empty.
53 - xxxx
FX Programming Key DeviceID Mismatch
54 - xxxx
FX Programming Key is Empty.
60 - xxxx
No Modem Found
Table 11: Diagnostic Codes
Diagnostic Code Description
F0 - 1006
Failed to clear trend buffer
F0 - 1202
FX Slave controllers not responding or not connected
F0 - 1301
Notification (SMS and/or E-mail) executed successfully
F0 - 1302
General notification error (for example, cable unplugged
during notification)
F0 - 1303
Notification skipped due to comm. failure (low GSM signal
strength, wrong e-mail address, and SMS mobile number)
F0 - 1401
GSM/Standard modem failure (switch off, not working)