FAST ComTec MCDWIN User Manual

WEBMCA Programming
ComTec GmbH 6-3
6.1.8. DEVICE-Object
DEVICE
Elements req. Content
DEVICETYPE X Device type
REVISION X Hard- and software revision
SERIAL X Device serial number
PARAMETER X Parameter
6.1.9. PARAMETER-Object
PARAMETER
Elements req. Content
MEASUREMENT Measurement parameter
NETWORK Network parameter
AUTH Auth.-parameter
OBJECTS Data objects
6.1.10. MEASUREMENT-Object (ext. ADC)
MEASUREMENT
Elements Req. Content
ACQUISITION X Flag measurement active (r/w)
ACQUISITION_STOP_CONDITION X Condition for stop of measurement
0 - no stop
1 - manual
2 - extern
3 - via preset
ADC_TYPE X Type of connected ADC (r)
DWELLTIME_EXTERNAL X Flag for MCS advance external via connector
(r/w)
COARSEGAIN Not for external ADC
FINEGAIN Not for external ADC
HIGHVOLTAGE Not for external ADC
OFFSET Not for external ADC
PRESET List of settings for start-/stop conditions
ACQUISITION_MODE X Measurement mode (r/w)
- PHA
- PHAS (stabilized) (for future use)
- MCS (for future use)

FAST ComTec MCDWIN Specifications

General

Brand	FAST ComTec
Model	MCDWIN
Category	Computer Hardware
Language	English