Fastjet A470 Series User Manual

(10) Turn on/turn off each valve and main pump separately.
(11) Set gutter mode Continuous or Intermittent.
(12) Drain the Ink System
(13) Wash nozzle automatically
(14) Ink system clean
2.8.7.Config
(1) Set nozzle temperature(0 to 40 ℃)
(2) Set pump pressure (0 to 450 Pa)
(3) It is able to set the viscosity of ink manual/auto.
(4) Set modulation value.
(5) Set phase charge value.
(6) Set phase offset value.
(7) Set charge value.
(8) Set EHT trip level.
(9) Set the contrast of the LCD.
Page 12

Fastjet A470 Series Specifications

General

Brand	Fastjet
Model	A470 Series
Category	Printer
Language	English