Fastjet A470 Series - Logo User Field Creation Guide

3.5.7. Logo User Field
The Logo User Field can create the customized logo of maximum 34 dots
height."
1. Enter the USER FIELD menu，select New User Field, as shown in the
figure below:
2. Input a file name, switch “Attr” to “Counter” then confirm , as shown in
the figure below:
3. Operation instructions for logo are shown in the following table:
Page 28
Key combination
Function
Move the cursor by a dot
+
Move the cursor by a dot, and fill the dot
+
Move the cursor by a dot, and delete the dot
Reverse the current dot, draw dot / delete dot