Fastjet A470 Series User Manual

3.6 Message Parameters
3.6.1 Modify message parameters
In the main screen, press the F3 key to enter the interface to modify
parameter of current message , as shown in the figure；
More detail about Message Parameters, please read the following table:!
Page 32
Parameter
Range
Function
Character
Width
1-255
Set information width, If the value is 1, the jet printing
speed reaches the fastest speed under the current dots.
Character
Height
1-10
The larger the value is, the higher character is.
Character
Gap
0-8
The larger the value is, the larger the character spacing
is.
Product"
Delay
3-1000
0
Set product jet printing delay time. The larger the value
is, the longer the time delay is.
Inverse
On / off
Adjust the character jet printing up / down direction
Reverse
On / off
Adjust the character jet printing left / right direction
Raster
Repeat
0-7
Bold the current message
Printed
Dots
5-34
The larger the value is, the slower the speed is, and the
larger the number of dots to be printed is. "
The smaller the value is, the faster the speed is, and the
smaller the number of dots to be printed is.

Fastjet A470 Series Specifications

General

Brand	Fastjet
Model	A470 Series
Category	Printer
Language	English