3.5.8 Code User Field
This function can integrate multiple User Fields ( Time, counter and text ) in
to generate a code.
1. Enter the USER FIELD menu，select New User Field, as shown in the
figure below:
2. Input a file name, switch “Attr” “Code” then press Enter to confirm ,
When the cursor hovers between Content 1 and Content 6, press F2 to
insert in sequence the User Fields to be combined. as shown in the figure
below:
Note:"
When the code type is selected as Data Matrix or QR code, the Barcode Width and
Height shall be set. For more details please refer to “ 3.5.4 Additional remarks for Barcode
User Field ”#
To Next Page
Loading...