3.5.6. Instructions for items in the Counter
1. Start value : Start value of the counter.
2. Current value: Set the current value of current counter
3. End value : End value of the counter
4. Reset value : Value to be reset when the function of "Reset Counter" of
the Photocell 2 is used.
5. Step size : 1 at default, if set as 2, the counter will become "1, 3, 5,
7, ...".
6. Direction : Increase or decrease can be selected.
7. Repeat Count : 1 at default, printing times of each current value. For
example, if set as 2, each counter will be printed for 2 times.
8. Leading Char : Leading character in front of the counter. For example, a
counter range from 1 to 999, when the print counter is “1" and the
leading character is "blank space", the printing result is "1". When the
leading character is "0", the printing result will become "001".
9. INC/DEC : It is used for nesting use between all the counters in the
printer.
10. Print Form : The counter can be converted to printing in special form,
such as 1D barcode and 2D Barcode. For more details please refer to
“3.5.4 Additional remarks for Barcode User Field”.
11. Barcode width : When the “Print Form" is Data Matrix or QR Code, it
is required to set the "Width" and "Height"
12. Barcode Height : When the “Print Form" is Data Matrix or QR Code, it
is required to set the "Width" and "Height"
To Next Page
Loading...
Need help?
General
