3.2. Start The Printer
3.2.1. Start Jet
1. Connect the printer to an appropriate power source.
2. Open the printer head cover, check various components in the
printhead, and check that various components are clean and dry.
3. Put on the printhead cover, press the power button at the right side of the
printer, and wait for the screen to enter the main operation interface
4. Press F1 to start the program for about 3 minutes. The interface is as
follows:
5. Observe the status indicator and the main screen. When the green LED
is lit, the startup is completed. The interface is as follows:
To Next Page
Loading...
Need help?
General
