Basic key operation
(1) When the inverter is powered on, it automatically enters Running mode. In Running mode, press t e h
key to enter Programming mode. The menu for function selection will appe
ar.
(2) Use the / keys to move the pointer
Æ
to "5. MAINTENANC."
(3) Press the
key to display the maintenance screen (one out of a total of 7 pages).
(4) Use the
/ keys to select the target item page and confirm the maintenance data for that item.
(5) Press the
key to go back to the menu.
Figure 3.15 shows the LCD screen transition for "5. MAINTENANC."
3-21
To Next Page
Loading...