FEC HFC3000 - Page 40

Chapter 4 Installation
PAGE 4-8
4-5-2 controller I/O Signals [BANK SELECT = ON]
The following output changes.
Pin No.
Signal
IN/OUT
Description of Function/Usage
TB1-12
BANK SELECT=[ON]
IN-12(NO)
Bank select signal (for WORK SELECT return signal)
TB3-7
WORK OUTPUT BIT 2
OUT-6(NO)
When BANK SELECT=[ON], return output of the select signals
of WORK SELECT BITS 2 and 3 is performed.
Note 1)
TB3-8
WORK OUTPUT BIT 3
OUT-7(NO)
TB2-1
WORK OUTPUT BIT 5
OUT-1(NO)
[ON] is output when any of 33 WORK to 64 WORK is selected.
TB2-2
NONE
OUT-2(NO)
[OFF] is output at all times.
TB2-3
NONE
OUT-3(NO)
TB2-4
WORK OUTPUT BIT 0
OUT-4(NO)
When BANK SELECT=[ON], return output of the select signals
of WORK SELECT BITS 0, 1, and 4 is performed.
Note 1)
TB2-5
WORK OUTPUT BIT 1
OUT-5(NO)
TB2-6
WORK OUTPUT BIT 4
OUT-12(NO)