Federal Signal Corporation SS2000+ ? Series User Manual

14
Specications
SS2000+ Series C
Federal Signal www.fedsig.com
AUX Relay Outputs 2 A at 30 Vdc, 0.5 A at 120 Vac
Speaker
Monitors Transmit and receive audio
Power 1 watt
Impedance 8 Ω
Microphone
Input Levels 10-150 mV
P-P
nominal input
Input Impedance 10 kΩ
Input Jack XLR Male
Type Dynamic, non-amplied mic
External Mic Input
Balanced, Low Impedance
Dynamic mic.
Sensitivity adjustable from
10-150 mV
P-P
for non-amplied
30-570 mV
P-P
for amplied
10 kΩ Impedance with VOX or Jumper Selectable for
Amplied mic, 48 Vdc Phantom power
Line Input 120 or 240 Vac wall transformer power supply
Levels 0.25-5.0 V
P-P
, 894 mV
P-P
nominal input,
with PTT closure input, active with < 3 kΩ
Remote Activation Inputs
Momentary contact closure for activation
Debounce 250 ms
Active with < 1.5 K to ISO GND (2 mA)
I
2
C/Keyboard Expansion Port
I
2
C Port Protocol Philips Standard I
2
C
Ethernet Network Connection
Ethernet:
Standard IEEE 802.3
Physical Layer 10/100 Base-T
Data Rate 10/100 Mbps (auto-sensing)
Mode Half-duplex and full-duplex support (auto-sensing)
Connector RJ-45 port, TCP/IP
Environmental
Operating Temperature 0°C to +60°C (32°F to +140°F)
Humidity 0-95% Non-Condensing
Dimensions
Desk Mount (H x W x D) 3.59 x 11.59 x 9.53 inches (91.8 x 294.4 x 242.1 mm)
3U Rack Mount (H x W x D) 5.19 x 19 x 10.10 inches (131.8 x 482.6 x 256.5 mm)
Shipping Weight
Desk Mount 6 lb (3 kg)
Rack Mount 8 lb (4 kg)

Federal Signal Corporation SS2000+ ? Series Specifications

General

Brand	Federal Signal Corporation
Model	SS2000+ ? Series
Category	Controller
Language	English