Federal Signal Corporation SS2000+ ? Series User Manual

47
SS2000+ Hotkey Activation
Description, Specications, SSLoader + Software, and Operation Manual
Federal Signal www.fedsig.com
When a Report - All is executed, the SS2000+ polls the units in the Digital list and logs
each poll and response. When complete, the SS2000+ polls the units in the DTMF list,
converting the DTMF reply to the same format as the Digital information and logs each
poll and response.
Requesting a Report from All Sites
To request a report from all of the sites:
1. Press the REPORT key from the STANDBY screen.
The SS2000+ LCD displays the following.
Select:
ALL or SITE
REPORT STANDBY
2. Press ALL and the SS2000+ polls the sites in its site lists.
3. Press CLEAR to stop the process and return to the STANDBY screen.
Requesting a Report from Individual Sites
To request a report from an individual site:
1. Press the REPORT key from the STANDBY screen.
2. Press MODE/SITE.
The SS2000+ LCD displays the following:
Enter Site:
Sites = 1 to 256
REPORT SEND to START
3. Enter the site number.
4. Press CLEAR to clear the site number for re-entry.
5. Pressing CLEAR again or MENU, stops the process and returns you to the STANDBY
screen.
6. Press SEND and the SS2000+ polls the site and logs the results.
The SS2000+ LCD displays the following:
Site#001
Requesting Report
REPORT STANDBY

Federal Signal Corporation SS2000+ ? Series Specifications

General

Brand	Federal Signal Corporation
Model	SS2000+ ? Series
Category	Controller
Language	English