Federal Signal Corporation SS2000+ ? Series User Manual

53
SS2000+ Hotkey Activation
Description, Specications, SSLoader + Software, and Operation Manual
Federal Signal www.fedsig.com
After 10 seconds, the SS2000+ LCD displays the following.
SEND to Transmit
CLEAR to Quit
4. Press SEND to send the tone for another 10 seconds or press CLEAR or MENU to
return to the STANDBY screen.
Setting the Date and Time
To set the date and time:
1. Press the MENU button.
2. Press 3.
The SS2000+ LCD displays the following.
'+' or '-' to Change
SEND to move to Next
|
16:24:38 6/01/2019
Press Action
SEND
Moves the Pointer | to the next eld.
+ Increases the number in the eld
- Decreases the number in the eld.
3. Press CLEAR or MENU to save the date and time on the display and return to the
STANDBY screen.
Executing the Self Test
To execute the self test:
1. Press the MENU button.
2. Press 4.
The SS2000+ LCD displays the following.
LCD Message Test;
Press (+) if OK.
Press (-) if Failed
CLEAR Key to quit.

Federal Signal Corporation SS2000+ ? Series Specifications

General

Brand	Federal Signal Corporation
Model	SS2000+ ? Series
Category	Controller
Language	English