Federal Signal Corporation SS2000+ ? Series User Manual

32
Using the SSLoader+ Software
SS2000+ Series C
Federal Signal www.fedsig.com
DTMF Communications
The following shows the DTMF Communications group box of the General Configuration
tab.
Field Description
Spin box—Site # Selects the RTU (siren site number).
Site Active Check if the unit is active.
DTMF Gap Time Enter DTMF gap time ranging from 5 to 100 ms.
DTMF Digit Time Enter Digit time ranging from 35 to 100 ms.
Descriptions of Functions Reported by RTUs–Sent to Printer
When a site is polled, it reports back the last function number that was run. This is where
the name and description for the functions are entered. These names and descriptions
are sent to the printer when the site reports back.
The following shows the Descriptions of Functions Reported by RTUs–Sent to Printer
group box of the General Configuration tab.
Field Description
Spin box—Function # Selects the function number.
Function Name Enter the name.
Function Description Enter the description.
Comm Port Parameters
The following shows the Comm Port Parameters group box of the General Configuration
tab.

Federal Signal Corporation SS2000+ ? Series Specifications

General

Brand	Federal Signal Corporation
Model	SS2000+ ? Series
Category	Controller
Language	English